Replace Cartridge Holder on jetStamp 790 and 792
Watch the support video.
Download the support guide.
Summary
1
Disassembly
Disassemble jetStamp printer by removing the base plate (4x Torx T6 screws )and removing the 2x phillips head screws from the handle
2
Remove old cartridge holder
Unplug the ribbon from the board and unscrew the cartridge holder from the print carriage (2x phillips head screws)
3
Fit the new cartridge holder
Pull the ribbon cable through and attach to the board connector. Attach the cartridge holder to the print carriage using the 2x phillips head screws (fasten loosely only)
4
Reassemble and adjust
Reassemble the printer in reverse order to disassembly and make final height adjustment of the cartridge holder before tightening the cartridge holder screws.
Watch Procedure Video
COMING SOON The video describes the disassembly, fitting cartridge holder and reassembly of the jetStamp printer.